Netgear AC750 Setup: Guide for Hassle-Free Installation
Netgear AC750 WiFi Range Extender fills gaps in the router signal to reach more regions. To work, the gadget must be set up and placed properly. Many users face difficulties installing it since it’s not as easy as just putting it in. They need to choose the right way to set it up, log into the extender, and make sure it connects to the right network.
There is a step-by-step guide on this page to help you complete your Netgear AC750 setup. It tells you the basic steps for installing it, how to set it up step by step, and how to address common difficulties. The goal is to make the processes clear so that you can easily install the extension.
Why is the Netgear AC750 important?
- It is meant to extend the range of your WiFi to the corners where your primary router can’t quite reach.
- The AC750 usually addresses dead spots in your home, such upstairs or in the garden.
- It can connect to both 2.4GHz and 5GHz devices since it has two bands.
That’s the quick pitch. You can only see the actual worth after you put it up properly. A lot of problems people have with poor signals aren’t due of the technology; it’s typically because of how it’s set up or where it is.
Netgear AC750 Setup via WPS & Browser Method
There are two major methods to connect your Netgear AC750 to your router. Choose the one that seems easiest to you.
1. Setting Up with the WPS Button
Go with this method, if your device is compatible with it and has a WPS button.
- Power source the extender by plugging it into a working power outlet and wait for the power LED to stop blinking.
- Press the button on your router that says “WPS.” Press the WPS button on your AC750 within two minutes.
- Press the button on both devices to establish the connection. The LED on the extender will turn green.
- If necessary, do the same thing for both the 2.4GHz and 5GHz bands.
- After connecting successfully, install the extender between the dead network zone and the router location.
It goes quickly. You don’t have to fill in passwords. But you’ll need the other way if your router doesn’t support WPS.
2. Set up using a web browser (mywifiext.net)
This approach works with all routers.
- Connect your phone or computer to the extender’s network. You should notice something like NETGEAR_EXT in your WiFi list.
- In the address bar of your browser, type mywifiext.net.
- You will see the Netgear range extender setup page. Now fill in the required credentials that is usually, “admin” and “password” unless you’ve changed it.
- The wizard will automatically help you detect the home’s WiFi network.
- Now, among that list of WiFi network, choose the primary WiFi network, type in its password, and then click “OK.”
- Name the extended network (It’s not mandatory. You can keep it same as the router’s WiFi name or just add “_EXT” to the end to make it easier to find).
- Save the settings, let the extender restart, and you’re ready to go.
It takes a few minutes, but it offers you complete control and works with anything.
Placement Tips
Many people make mistakes with positioning even after setting it up. Here are some short yet significant things to remember:
- Don’t put the extension in the dead zone itself. For it to operate, it requires a solid connection to the main router.
- Place it midway between the router and the place where the signal drops.
- Don’t plug it in near thick walls, microwave ovens, or cordless phones. They get in the way more than you may think.
Common Problems and How to Fix Them
No Netgear AC750 Setup guide is complete without a section on how to fix problems. There are several little problems with the Netgear AC750. Here’s a brief list of things that can go wrong and how to remedy them.
Not able to enter mywifiext.net
Try using the IP address, i-e “192.168.1.250” instead of the URL. And make sure, you are connected to the extender’s network and not any other internet connection.
The connection keeps breaking
It might be positioning. Get it a little closer to the router. Check for updates on the settings page as well, as firmware upgrades might often assist.
The extender works, but the internet is still sluggish.
Keep in mind that extenders repeat the signal. The extender can’t make your basic internet speed faster if it’s already slow. It only makes what’s there longer.
Settings You Might Want to Look Into
The extender’s admin dashboard contains a few more capabilities that are useful for anyone who don’t mind looking a bit deeper:
- Update Firmware: Firmware updates ensure device safety and functionality.
- Access Control: Select devices to connect to the extension.
- SSID Options: Choose to merge or separate SSIDs with your router.
- Logs and Status: Check for issues without waiting for WiFi to cease operating.
Quick Recap: Steps
If you don’t want to read much, start here:
- Power on the extender.
- Connect via WPS or mywifiext.net.
- Follow the instructions, type in your WiFi information, then click “Save.”
- For the optimum coverage, put the extension in the middle.
- Look at the LEDs to make sure it works.